Evaporative Air Cooler
Industrial Air Cooler Features: flexible appearance with different choices such as suction air, blow air, delivery air from front, below are all available;
Drip tray nozzle is mounted at an angle of 45°, condensate water could be completely drained;
Fan diameter（mm）: 400, 450, 500, 630, 800
|
Temperature Range
|
Evaporating temperature (To)
|
Air inlet temperature (Tr)
|
Refrigeration capacity
|
|
High
|
0℃
|
10℃
|
5.6~162.2kW
|
|
Middle
|
-8℃
|
0℃
|
2.8~111.7KW
|
|
Low
|
-25℃
|
-18℃
|
1.8~88.1kW
|
|
lower
|
-31℃
|
-25℃
|
1.6~63.8kW
|
Advantages about Air Cooler for Blast Freezer
Rational Design
Experienced engineers use Italian advanced design software to design, meeting the demand accurately
Product suitable to the latest refrigerant such as R410A、CO2and other special refrigerants are available
Pipeline design adopts the direct oil return and counter-current heat exchanger to avoid the accumulation of refrigeration oil, which make full use of the heat transfer area, improve the heat exchange efficiency and ensure the degree of superheat
Reliable raw materials
The fans of air cooler are famous brand ZIEHL-ABEGG and EMB, reasonably match with the gap between blades and blast rings, and the design of hyperbolic air duct to achieve the maximum effect
Cooper tubes are multi-tooth and internal thread with high-efficiency. The copper rate is more than 99.9%. All of these increase the surface area and heat transfer efficiency.
